Shop products

8g  & 10g x 50 x 2

1 x 50  length

No 3 x  50mm x 12g & 14g

No 2 x  25mm. 6g, 7g, 8g, 9g, 10g + Specials

14g -20  x 14mm. Fixing noggins to studs, studs to top & bottom plates. If  adjustments are required on site, drill a 5mm pilot hole.

M6 - 1.0  x 17mm

Fixing Steel sections where a low profile head is required.  Applications include attaching brackets, noggins, bracing boards etc. Use  larger 12g & m6 diameters for heavier duty applications such as fixing  lintels, bracing strap to studs, top and bottom plates.

12g -  24 x 18mm

Fixing Steel sections where a low profile head is required.  Applications include attaching brackets, noggins, bracing boards etc. Use  larger 12g & m6 diameters for heavier duty applications such as fixing  lintels, bracing strap to studs, top and bottom plates.

10g -  16 x 16mm

Fixing Steel sections where a low profile head is required.  Applications include attaching brackets, noggins, bracing boards etc. Use  larger 12g & m6 diameters for heavier duty applications such as fixing  lintels, bracing strap to studs, top and bottom plates.

14g - 20  x 45mm

Bottom plates through timber subfloor to steel floor joists.  Denser timbers may need clearance holes.

12g -  14 x 45mm

Bottom plates through timber subfloor to steel floor joists.  Denser timbers may need clearance holes.

10g - 16  x 45mm

Timber florring to steel joints. Available in Quickmates  Collated System for fast and easy, erect installation or loose. The codes  shown are for loose screws.

8g - 18  x 42mm

Timber florring to steel joints. Available in Quickmates  Collated System for fast and easy, erect installation or loose. The codes  shown are for loose screws.

1.83 X  45mm

When fixing Skirtings & Architraves to thin steel several  options are available. Extended Pt BulletS are recommended as they provide  the maximum holding power with high strip torque resistance. Timber ride up  and surface damage is eliminated thus reducing the surface preparation needed  prior to painting

6g - 20  x 50mm

When fixing Skirtings & Architraves to thin steel several  options are available. Extended Pt BulletS are recommended as they provide  the maximum holding power with high strip torque resistance. Timber ride up  and surface damage is eliminated thus reducing the surface preparation needed  prior to painting

7g - 19  x 50mm

When fixing Skirtings & Architraves to thin steel several  options are available. Extended Pt BulletS are recommended as they provide  the maximum holding power with high strip torque resistance. Timber ride up  and surface damage is eliminated thus reducing the surface preparation needed  prior to painting

10g - 16  x 65mm

When fixing Skirtings & Architraves to thin steel several  options are available. Extended Pt BulletS are recommended as they provide  the maximum holding power with high strip torque resistance. Timber ride up  and surface damage is eliminated thus reducing the surface preparation needed  prior to painting

10g -16  x 65mm. For fixing Door Jambs, Window Reveals & timber to steel frames ≤ 1.5mm. Provides extremely high Pull-out and Strip torque strength.

6g -  20 x 25mm. Plasterboard to Ceiling battens & Wall Frames with steel  thicknesses ≥0.75mm to ≤ 2.3mm. Available Collated or  Loose.

6g - 18  x 25mm. Plasterboard to Ceiling battens & Wall frames with steel  thicknesses ≤ 0.75mm. Available Collated or Loose.

10g -  16 x 22mm. Fibre Cement boards for Soffit, Eaves, Wet Area lining or bracing  to stell supports where a low profile finish is preferred.

12g-11  x 20mm. Fibre Cement boards for Soffit, Eaves, Wet Area lining or bracing to  stell supports where a flush finish is preferred.

10g-16 x  16mm. Ceiling Batterns to trusses, Fascia brackets to trusses, joining wall  frames.

12G-14 x  40mm. Roof Battens to trusses where combined steel thickness is ≥ 1.2mm

12G-11 x 40mm. Roof Battens to trusses where combined steel thickness is ≤ 1.5mm

g550 blue tint 173mm

g550 blue tint 173mm

32m